Brakes

Replacing Rear Pads with Electric Parking Brake (EPB)

  1. Ignition ON, engine OFF
  2. Manually via the switch disengage, engage and disengage again the parking brake
  3. Open brake calipers
Control unit 03/53 (ABS)
Basic Settings (4)
Start lining change mode/Channel 7
[Go]
(Wait: Running → Not Running)
[Stop] → [Done]
  1. Ignition OFF
  2. Replace brake pads
  3. Ignition ON
  4. Close brake calipers
Control unit 03 (ABS)
Basic Settings (4)
End lining change mode/Channel 6
[Go]
(Wait: Running → Not Running)
[Stop] → [Done]
  1. Manually via the switch engage and disengage the parking brake
  2. Turn OFF the ignition and then turn it back ON
  3. Clear Fault Codes

Test

Control unit 03 (ABS)
Basic Settings (4)
Electro-mechanical parking brake function test/Channel 10
[Go]
(Wait: Running → Not Running)
[Stop] → [Done]